Battery Chargers for Tamiya, Kyosho, Colt, HPI etc Radio Control Cars
www.TamiyaParts.co.uk - For all your Tamiya Spares & Parts, Hop Ups, Acoms Radio Equipment, Mtroniks Speed Controllers and more in the UK
You are browsing "The Catalogue" - you can also order all of these items and more from our Shopping basket site
You are viewing our Catalogue store. To view our Shopping Basket store, click here! Corgi Platinum Stockists - and Gold Star Stockists before that, Tamiya Approved Dealer, Scalextric and Hornby approved dealer - we have the products you need at the price you want to pay! All our prices are in Sterling  We take Visa, Mastercard, Switch/Maestro and Solo  Our store is secured by SSL and Encryption
Express Delivery to most areas from £2.95. Easy going? Select "No Rush" for low cost delivery (terms & conditions apply)		  
 
Contact Us About Us Help Centre Order Now  
  Main Menu Corgi Classics Model Buses Railways Radio Control Tamiya Parts Slot Racing Bond/Films Newsletters  
  For manuals & look up lists for Tamiya & Kyosho parts, click the button to the right... _Manuals   Japan USA  

    Gift Ideas? Click Here! ¦ Home > Tamiya Parts > Battery Chargers for Radio Control Cars

Chargers for 7.2v Nicads & Nimhs

Battery & Charger Superdeals - click here

Chargers for 7.2v "Race Packs"
Click here to order this item via our Shopping Basket site
C606014 Carson Mains Charger for Tamiya/similar 7.2v Nicad/Nimh
Charge times are approximately 1 hour per 250Mah of your battery capacity - so a 1750 battery takes around 7 hours, a 2000 takes around 8 hours etc.  Suits capacities under 2500mah.		 £6.25

AC9

Ansmann Mains Notional 9 Hour Charger for Tamiya/similar 7.2v Nicad/Nimh
Charge for 40 minutes per 100MAH of your battery. e.g. 1500=9 hours, approx

£7.99
Powerjack 6-8 Ansmann Mains Notional 9 Hour Charger for Tamiya/similar 7.2v to 9.6v Nicad/Nimh 
Charge for 40 minutes per 100MAH of your battery. e.g. 1500=9 hours, approx		 £7.99
ET0220 Etronix  1000Mah 7.2v Charger (Fast / Cheap)
At 1000Mah output, allowing for around 10% inefficiency which is the norm for chargers, the following charge times should be expected: 1800-2000 Mah - 2 to 2 1/4 Hours, 2300 Mah - 2 1/2 Hours, 3000 Mah - 3 1/4 Hours. To calculate charge time, take your battery capacity and divide by 900 - e.g. 3600 divided by 900 = 4 hours.

Please note: This is NOT a peak charger - you must work out the charge time for your battery and switch off when it's had it's time to avoid overcharging. 

£8.25

Powerjack 6 Delta Pro

Ansmann Powerjack 6 Delta Pro (PJ6DP) Delta Peak Mid-Speed Charger for 1400Mah to 3500Mah 7.2v batteries.   900ma output.
Charges Nicad and Nimh.  Mains input, automatic cut off, trickle charge follow-through after peak.  Typically takes 2 hours to peak charge a 1500-1700 battery, approx 4 hours for a 3000 battery.  Good budget choice.

£10.99
Delta 3 Ansmann AC/DC Delta 3 Amp Peak Fast Charger
(New Generation ACX1 - Suits 1400mAh to 4500mAh Packs)
DESKTOP PEAK DETECT FAST CHARGER
This ultra fast Charger is designed to fully control the charge state of the pack using Delta Peak detection to check when the pack has reached full capacity and automatically switches the fast charging current to a trickle to keep the battery pack full without overcharging it. A safety timer is also incorporated to switch the current to a trickle at a pre-determined period of time.

This charger has the advantage of always charging the pack to full capacity, irrespective of the state of charge of the pack. It will never overcharge a pack.

Chargers & Packs should be placed on a fire proof surface. The charging process should be carefully monitored by an adult.- never leave unattended.

The battery should be disconnected if it begins to feel hot.

Features
- For Charging 7.2v [6 cell] & 8.4v [7 cell] Battery Packs
- Charges Ni-cd & Ni-mh Battery Packs
- Suitable for Packs from 1400mAh to 4500 mAh
- 90 minute safety timer – electronically controlled on plugging the battery to the charger
- Fast Charge Current 3A, Trickle Charge Current 180mA
- Protected against short circuit & wrong polarity
- Auto switch to trickle charge when pack full
- AC 230v mains & DC 12v – 16v Car input
- Fitted with Tamiya Plug
- Red LED denotes Fast charging / Green denotes Trickle charging

Typical Charge Times From Flat
1500 mAh = 35 minutes
1900 mAh = 45 minutes
3000 mAh = 70 minutes 		£24.99

BD02

As Ansmann AC/DC Delta 3 Amp with a Ansmann 2000 race pack  STAR BUY

£36.99

BD05

As Ansmann AC/DC Delta 3 Amp with two Ansmann 2000 race packs  STAR BUY

£49.99
C606021 Carson C606021 Mains 4 Amp Peak Charger
A powerful 4 amp peak detect charger fitted with a UK mains plug. This charger will typically take about 45 to 50 minutes to charge a typical 3000 mah pack, and can be used for charging packs up to around 4500mah capacity.

Specification:
 
bullet Input: AC220/230v
bullet Auto Trickle Charge
bullet Fast Charge 4 Amp
bullet Suitable for packs to 4500 mAh Capacity
bullet Fast Charge 7.2 NiCad / NiMh Packs 
bullet Reverse Polarity Protection
£29.99

Chargers suitable for both NIMH and LIPO Batteries
xMove Deluxe Ansmann 153000020 xMove Deluxe (12v)
Easy operation thanks to straightforward program structure via four-button terminal with user guidance, high-contrast two-line LCD display for showing all relevant parameters such as power, voltage, charging time and charged-in capacity. The xMove Deluxe provides you with an affordable, computer-controlled universal quick charger that allows you to charge both traditional rechargeable NiCd, NiMH and PB battery packs. In addition, it can also charge or regenerate the new rechargeable Li-Ion and Li-Po battery packs independently of the fixed mains supply, from a car battery or another 11-15V DC power supply. It provides model enthusiasts with a high degree of flexibility for enjoying this great hobby both indoors and outdoors.
  • Operating voltage 11-15V DC (NOTE: DC input only)
  • Battery types 1-14 NiCd cells
  • 1-14 NiMH cells
  • 1-5 Li-Ion/Li-Po cells
  • 1-6 Pb cells
  • Charging current up to 5000mA (max. 50W)
  • Trickle charge (NiCd/NiMH) 100mA
  • Weight 330g
  • Dimensions 119 x 102x 85mm
    		• £45.99
    xBase 2.0 Ansmann 151100003 xBase 2.0 (12V/240V)
    The xBase 2.0 has an AUTO feature that automatically controls the supply current when charging or discharging accumulators. This prevents overcharging, which can damage batteries. The integrated voltage regulator for lithium batteries controls the voltage for each individual cell in a battery pack. This makes having a separate charger for cell voltage control in lithium batteries (Li-Ion, LiPo and Li-Fe) unnecessary. xBase 2.0 can monitor and control the voltage of each of the individual lithium battery cells while discharging. As soon as the voltage in any of the cells exhibits unusual fluctuation the charging process is interrupted and an error message appears. You can charge lithium batteries for specific uses. FAST charging mode reduces charging time, STORAGE mode regulates the target voltage of the battery, enabling you to store the battery for longer periods. Automatic charge interruption works according to the delta peak voltage detection principle (NiCd and NiMH batteries). You can perform up to five charge/ discharge cycles or discharge/charge cycles to refresh and balance batteries.

    Specifications

    bullet Input voltage 11-18.0V DC,10C-230V AC
    bullet Performance Max. 50W for charging; max. 5W for discharging
    bullet Charging current 0.1 to 5.0A
    bullet Discharging current 0.1 to 1.0A
    bullet Battery types 1-15 NiCd/NiMH cells
    bullet 1-6 Li-Ion/Li-Po/Li-Fe cells
    bullet Lead acid battery voltage 2 to 20V
    bullet Weight 580g
    bulletDimensions 140 x 130 x 45mm
    		£58.50
    ET0219 Etronix ET0219 Powerpal MAINS Pocket Sized Lipo Charger for 1-3 Cell Packs
    A good replacement for the standard charger that is "thrown in" with some ready to run cars, or for those who only have a DC charger, this unit gently charges at a rate of 650Mah and will take the commonly used XH fitting balancing plugs.

    Manufacturer's Specification follows

    - Fitted with UK/Ireland 3 Pin Plug
    - Power supply voltage: 110-240v AC
    - Cell count range: 1-3 cells
    - Max charge current: 3 x 650 mA
    - Mode Display: 3 x LED
    - Weight: 180g (approx)
    - Dimensions: 100 x 60 x 35mm    		 £12.99
    Out Of Stock
    ET0218 Etronix ET0218 Powerpal Pocket Plus+ DC LiPo 2/3/4s Charger
    A pocket sized DC input LiPo charger suitable for 2, 3 or 4 cell batteries.  This unit is economical to buy and operate.  Power is supplied by a DC source (car battery / desktop transformer etc).

    Manufacturer's Specification Follows:

    - Operating Voltage Range: DC11.0 - 18.0 Volt
    - AC to DC adaptor: DC11.0 - 18.0V/3A (not supplied)
    - Li-Ion/Polymer cell range: 1-4 cells
    - Current drain for balancing LiPo cells: 300 mAh/cell
    - Charge Current Range: 0.5-4.0A (Max 35w power)
    - Weight: 180g
    - Dimensions: 100 x 61 x 33mm    		 £18.99
    ET0207 Etronix ET0207 Powerpal Compact 40W DC Input Balancing Charger for LiPo/ LiFe
    This is a compact, easy to use 40 watt charger, featuring balancing circuitry and an LCD screen for ease of operation.  This will charge all LiPo packs that are usually supplied with RC cars (1 to 4 cells - i.e. 3.7v to 14.8v).

    Input is DC (i.e. a car battery or other 12v source).

    Manufacturer's specifiction is below:

    Powerpal Compact Specifications

    - Input Voltage: 11-15V DC
    - No.of cells: 1-4 Battery
    - Type: Lipo/Lilon/LiFePO4(A123)
    - Charging Current: 0.1-3.5A(40W)
    - LCD display: Voltage, Current, Capacity, Charging Time and Battery Type
    - Dimension: 119*66*23.7mm Weight: 180g    		 £28.49
    ET0500 Etronix ET0500 Battery Doctor - Li-Po/Li-Fe Battery Balancer / Discharger / Meter
    The Etronix Battery Doctor Balance/Discharger is designed for Li-Poymer and Li-Fe batteries between 2 and 6 cells. It can measure battery voltage precisely, balance individual cells or discharge batteries in preparation for storage. The balance and discharge function matches the individual cell to within ± 0.01V.

    The balance function can be executed before, during, or after the battery has been charged to ensure that your battery pack remains in optimum condition. The clear display continually updates with whole battery and individual cell voltage allowing you to monitor your pack for a faulty or poorly performing cell.

    The discharge function can be used to safely discharge all cells in the pack to a safe storage voltage. To prevent over discharging the user can set the discharge cut off voltage.     		£28.49
    ET0200 Etronix ET0200 Powerpal Balancer Charger / Discharger AC/DC 1-6 Li-Po, Li-Ion, Li-Fe, 1-15 NiCd, NiMH, 1-6 Lead-Acid
    This new charger from Etronix is a jack-of-all-trades and also a master of them all too.  Basically you can charge anything from anything - AC or DC input, and charge anything from Nicad/Nimh to Lipo and also Lead Acid.  There is a built in cell balancer for Lipo and a discharge/cycle facilty too which suits all types of pack.

    Manufacturer's Specifications are as follows
    - Dual input power AC/DC, temperature sensor option and integrated Lithium battery balancer.
    - Charge current up to 5A, discharge current up to 1A, 1 to 6 series of Lilo/LiPo/LiFe, 1 to 15 cells of NiCd/NiMH, 2 to 20v of Lead-acid (Pb)
    - Includes: 1 x Charge leads for Receiver batteries, 1 x Receiver batteries JST plug, 1 x Glow stick, 1 x Deans connector, 1 x Crocodile Universal clip, 1 x JST XH Balance Board.
    - Battery Type: 1-6 Li-Po, Li-Ion, Li-Fe, 1-15 NiCd, NiMH, 1-6 Lead-Acid
    - Charge Rate: 0.1A-5.0A (Max 50W)
    - Discharge Rate: 0.1A-1A (Max 5W)
    - Cycle Charge/Discharge: 1-5 Cycles (charge>discharge, discharge>charge)
    - Balancer: Built-in individual voltage balancer for Lithium batteries 300mAh/cell current drain
    - Fast/Storage Mode: Charge Lithium batteries for special purposes. 'Fast' reduces charge time, while 'Storage' controls final voltage for long time storage
    - Charge Safety: Delta Peak Sensitivity voltage detection (NiCd/NiMH) Auto-Charge current limit useful for small capacity NiMH, Auto-Charge current limit useful for small capacity NiMH, Capacity limit charge, Temperature limit charge, Time limit charge
    - Battery Data: 5 model memory

    		 £58.50
    Out Of Stock

    Chargers for other applications
    No Picture QD Charger Ansmann QD5/QD7 Charger for use with Tamiya Quick Drive Cars - now sold as AC8 - same thing with an adaptor  
    No Picture AC8 Ansmann AC8
    Approx 6 hour charger to charge the AA batteries whilst inside an Acoms Techniplus handset    		 £4.99
     

    Contact Us  Postage and Packing  Help Centre   Place An Order Now   Terms Of Sale   Privacy Policy

    Type what you're looking for and hit Enter...  

    This website is a registered member of the SafeShop Approval Program and meets the industry agreed requirements as a member business. Click to Verify.

    The contents of this page are Copyright © 1997 to 2011 Time Tunnel Models.  Reproduction of data or images prohibited except when printed for personal use. Copyright on images used within this site is retained by the original copyright holder.

         This site is operated by: Time Tunnel Models, Unit 3, Fenton Barns Retail Village, North Berwick, East Lothian EH39 5BW, UK.  For telephone, fax and email please see our Contact Us page.  All prices displayed on this web site are in £Sterling.

    Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 3098. Please dispose of your used electrical items at an authorised recycling centre - if you do not know where your local centre is, please see www.recycle-more.co.uk for further information.      More information can be found by clicking here.      Information on Battery Recycling can also be found on that page.
    Your orders are processed very securely on this site
     
    Affiliated Sites and Recommended links
    Prices on this web site are applicable only to orders placed on line and must be quoted if orders are placed by telephone, fax or in person at our store.